Dairy Equipment
JM series colloidal mills
Colloid pump
GS Series Screw pump
High-Shear Homogenizer
Kettle type emulsifier
Mix the pump
Suction powder mixer
Piping fittings
Pneumatic pulp pump
 
     
 
    
Hao GS-type single-screw pump mainly by: Enter the driving shaft, bearing seat, seal parts, universal joint shaft, inhalation room, press out the room, rotor, stator and other major component parts. Of its compact structure, small parts, small size, maintenance is simple, rotor and stator is the pump wearing parts, structural simplicity, ease of Assembly and Disassembly.

Hao GS-type single-screw pump chart 1
1, discharging port 2, wearing bar 3, the rotor 4, the stator 5, tight hoop 6, pin
7, sealing sets of 8, intermediate shaft 9, the suction body 10, mechanical seal seat
11, bearing block 12, mechanical seal 13, shaft 14, frame 15, bearing
16, bearing 17, seal, 18, coupling 19, the base 20, motor

Hao GS-type single-screw pump chart 2

GS-type single-screw pump of the driving method





1,wearing a discharge mouth bar 2,rotor 3,stator 4,sealing sets
5,intermediate shaft 6,the feed port 7,mechanical seals 8,bearing

 
   
Copyright©2001 Wenzhou Hao Star Machinery Equipment Manufacturing Co., Ltd. All Rights Reserved
Tel:+86-577-86999999  86830999  Fax:+86-577-86827859
Connect with us: E-mail:cn7s@163.net